Fetco HWB-2110 10-Gallon Hot Water Dispenser B211051
![]() | |
| Fetco HWB-2110 10-Gallon Hot Water Dispenser B211051 (listing photo) | |
| Manufacturer | FETCO |
|---|---|
| Category | Hot water dispensers |
| Specifications | |
| Voltage | 208-240; 230 |
| Amperage | 25.4-33.8 A |
| Height | 31½” [655mm] |
| Width | 11” [279mm] |
| Depth | 22¼” [516mm] |
| Weight | 59lb [26.8kg] |
| Availability | |
| Listed price | $1,657.18 as of 16 November 2026[2] |
| SKUs | B211051, B211052 |
| Sold by | Majesty Coffee |
The Fetco HWB-2110 10-Gallon Hot Water Dispenser B211051 is a hot water dispenser made by FETCO. FETCO is based in Lake Zurich, Illinois, United States.[1] It runs on 208-240; 230 and draws 25.4-33.8 A. Majesty Coffee lists it in 2 configurations (heater configuration and voltage). As of 16 November 2026, Majesty Coffee lists it at $1,657.18.[2]
Configurations
| Configuration | SKU | Listed price |
|---|---|---|
| 2 x 3.0 kW / 208-240V | B211051 | $1,657.18 |
| 2 x 4.0 kW / 208-240V | B211052 | $1,657.18 |
Prices are Majesty Coffee listing prices as of 16 November 2026.[2]
Specifications
The specifications below are as published in the Fetco HWB-2110 10-Gallon Hot Water Dispenser B211051 listing.[2]
| Height (in.) | 31½” [655mm] |
|---|---|
| Width (in.) | 11” [279mm] |
| Depth (in.) | 22¼” [516mm] |
| Shipping Weight (lbs.) | 59lb [26.8kg] |
| Volume (gal/hr) | 10 |
| Volume (L/hr) | 38 |
| Recovery (gal/hr) | 10-20 |
| Electrical Configuration | Terminal Block-Hardwire |
| Volts | 208-240; 230 |
| Amps | 25.4-33.8 |
| Phase | single |
| Highly Energy Efficient Design | YES-multiple technologies in use |
| Faucet Guard | No |
| Silicone Tap | Yes |
| Body Construction | Stainless Steel/High Tech Polymeric |
| "ECO" Energy Saving Software | YES-Default(s) and user programmable |
| Temperature Selections | Operator-digital |
| SD Card Slot | Functions for input and download |
| Water Inlet Size | 3/8" flare |
| Minimum Flow Rate (gpm) | 1½gpm [5.7lpm] |
| Water Pressure Requirement (psig) | 20-75 psig [138-517kPa] |
Installation requirements
Electrical: 208-240; 230, 25.4-33.8 A. A dedicated circuit matched to the NEMA receptacle is standard for commercial installs.
Footprint: 31½” [655mm] × 11” [279mm] × 22¼” [516mm]; weight 59lb [26.8kg].
Comparable equipment
| Model | Manufacturer | Listed from |
|---|---|---|
| Fetco HWB-2110 10-Gallon Hot Water Dispenser B211051 | FETCO | $1,657.18 |
| Marco Countertop MIX Boiler PB3/PB8 | Marco Beverage Systems | $1,570 |
| Fetco HWD-2110 10-Gallon Hot Water Dispenser 1x5.0 kW/200-240V H211011 | FETCO | $1,657.18 |
| FETCO 5 Gallon Hot Water Dispenser Temp on Demand 2105TOD | FETCO | $1,636.20 |
| Fetco HWD-2110TOD 10-Gallon Hot Water Dispenser 1x5.0 kW/200-240V H211010 | FETCO | $1,826.55 |
| FETCO 5 Gallon Hot Water Dispenser HWD-2105 | FETCO | $1,409.40 |
| Fetco IP44 HWB-5 Hot Water Dispenser 3.0 kW/220-240V H05041MIP | FETCO | $2,017.51 |
Comparable models are other hot water dispensers in this wiki closest in listed price.
See also
- FETCO — manufacturer
- Hot water dispensers
References
- FETCO company information. fetco.com. Retrieved 16 November 2026.
- Fetco HWB-2110 10-Gallon Hot Water Dispenser B211051 — Majesty Coffee listing. majestycoffee.com. Retrieved 16 November 2026.
